EFI University

TurboNova · Posted: Thu Aug 28, 2008 7:43 pm Post subject: New cool intercooler couplers.

We are proud to announce that Linder Power Systems and Horsepower Connection have teamed up to bring you an alternative to the purple expensive clamps.

Currently we have 3" and 4" available in silver and black.

http://videos.streetfire.net/video/Linder-Power-Systems_103574.htm

Tested to 150 psi

these couplers are thread together and feature an o-ring sealing surface inside. Currently we are setting up a dealer network, if you are interested in becoming a dealer or would like to purchase some give us a call or e-mail.

brian@brianmacy.com

360-455-7252
_________________
Brian Macy
EFI University Instructor
Horsepower Connection
www.horsepowerconnection.com
www.forcedairracing.com

wickedmr2 · Joined: 12 Apr 2007 Posts: 29 Location: Bensalem, PA

Are those the only sizes these are made in?

TurboNova · Posted: Tue Sep 02, 2008 10:04 am Post subject:

They are the only sizes available as of now. 2" and 2 1/2" will be available soon.
_________________
Brian Macy
EFI University Instructor
Horsepower Connection
www.horsepowerconnection.com
www.forcedairracing.com

ecuflasher · Joined: 24 May 2008 Posts: 24 Location: EU

These need to be welded on?

TurboNova · Posted: Fri Sep 12, 2008 10:25 am Post subject:

These do have to be welded on.
Here is a test video of the proto type coupler.

http://videos.streetfire.net/video/Linder-Power-Systems_103574.htm[/url]
_________________
Brian Macy
EFI University Instructor
Horsepower Connection
www.horsepowerconnection.com
www.forcedairracing.com

stevieturbo · Posted: Fri Sep 12, 2008 12:26 pm Post subject:

They look quite pricey ??

These are available in Alu or stainless ??

Are these rigid couplers, are is there some flexibility with them ?

And price dependant....what benefits over a relatively cheap V-band ?
_________________
383 LS1, V7 YSi Very Happy

9.85 @ 144.75mph
http://www.youtube.com/watch?v=XgWRCDtiTQ0

TurboNova · Posted: Fri Sep 12, 2008 12:34 pm Post subject:

These are more than 1/2 the price of the equivlant Wiggins clamps.
They allow for expansion where a V-band clamp will not. The coupler will allow up to a 5 degree mis-alignment where a v-band clamp will not.
They are made of aluminum and are welded directly to the intercooler pipe.
_________________
Brian Macy
EFI University Instructor
Horsepower Connection
www.horsepowerconnection.com
www.forcedairracing.com

Jay7 · Joined: 20 Jan 2006 Posts: 18

When and where can we buy them from? I'm interested in trying these out...

Jay7...

TurboNova · Posted: Tue Oct 28, 2008 10:10 am Post subject:

The contact info is above.
_________________
Brian Macy
EFI University Instructor
Horsepower Connection
www.horsepowerconnection.com
www.forcedairracing.com

wickedmr2 · Joined: 12 Apr 2007 Posts: 29 Location: Bensalem, PA

Are these available in 2 1/2in yet?

Marty · Joined: 06 Jun 2007 Posts: 37

Seth Francis · Posted: Tue Dec 23, 2008 9:01 am Post subject:

I have a few customers interested as well, until then I will keep checking for updates on their site.

kamkuda · Joined: 06 May 2009 Posts: 6

these look excellent
It states on your website they can flex. Can you show a some additional shots of this.
Can this be used in some manner to coupler to a throttle body. I am using a FAST LS1 92 mm Throttle body
http://www.fuelairspark.com/Products/chevy/gen3/intake_bm92mm.asp

Do you ship to Canada?

TurboNova · Posted: Sat May 16, 2009 2:58 pm Post subject:

Yes, we ship to Canada.

They have a 5 degree misalignment to them. The sleeves inside the threaded outside couplers will float.
_________________
Brian Macy
EFI University Instructor
Horsepower Connection
www.horsepowerconnection.com
www.forcedairracing.com